Ana içeriğe geç

The 7th-generation Surface Pro, released in October 2019. Available in platinum and black. Model number: 1866.

27 Soru Tümünü görüntüle

What is the 1 TB Physical drive configuration for Surface Pro 7?

In the 2017 version of the Surface Pro, I have read that the 1TB option was actually made up of TWO 512GB drives. Is this still the case with the Surface Pro 7, or has Microsoft adopted a single 1Tb SSD drive configuration?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

As you can see here the SSD is a single device Surface Pro 7 - Teardown.

While we don’t know the makeup of the drive unit internally. Its possible the drive is two flash units for the 1 TB and just one flash for the 512 GB version.

If we look at the construct of a 2.5” SSD we often see multiple flash chips make up the drive. With higher density flash devices you’ll note the number of flash chips has been dropping for the same sized drive. The performance has improved over the years as the density has increased.

Bu yanıt yardımcı oldu mu?

Puan 2

3 Yorum:

Hi @sylverknuk ,

Just to add to the answer there are two places where you can find out the model number information of the SSD which you can then use to hopefully find out more information about it.

Device Manager > Disk drives

Control Panel > Administrative Tools > System Information > Components > Storage > Disks

tarafından

Thanks @danj and @jayeff ! Super helpful!!

tarafından

If you're set don't forget the score the answer & accept it. Thanks!

tarafından

Yorum Ekle

Yanıtını ekle

syl sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 10

Her zaman: 509