Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

4 Kasım 2017'de satışa sunulmuştur. Model A1865, A1901. GSM ya da CDMA olarak 64 ya da 256 GB kapasitelerinde, Gümüş ya da Uzay Grisi renklerinde satılır. ("iPhone 10" olarak da telaffuz edilir.)

Screen failed shortly after replacement

I had a failed screen and replaced it with one I bought from iFixIt. It worked great for 24 hours and then failed again, just flickered and went dark. Cracked it back open and reseated all the connections, still no joy. Plugged it in to confirm it is booting up and I get the audible confirmation that it is plugged in.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

@kuldaddy … thank you for your purchase and supporting diy. while it is possible that you may have received a defective part, this is rarely the case. typically, after installation of replacement parts, if new issues arise it is more than likely caused by the replacement process itself. however, with your case however, being that the device worked great a full day before going out again, i would say that there is something else going on with the motherboard and would need to be diagnosed before going through another screen. here is a guide to help with some retracing/troubleshooting, i would start here:

iPhone X Screen Replacement

with that being said, if you would like to seek out other options, please take a look at the return/exchange policy here:

https://help.ifixit.com/article/273-how-...

Warranty

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Eric Kulbeck sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 66