Eşyalarını Tamir Et Topluluk Mağaza

The Epson Stylus NX415 is a color inkjet printer. The printer uses T088/69/68 ink cartridges, which use a wetness sensor behind the visible primary chip.

4 Soru Tümünü görüntüle

Seçenekler

Error message displayed on printer.

The following error message is displayed on the printer. “ a printer error has occured. Then off the prjnter, then press On button to turn on. See your documentation. “ When this is done the error message is still there, even after unplugging the power and the line to the

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0

2 Yorum:

Please tell us the full error message and code if it had one.

tarafından

It just says error turn off and then on. It didn’t do anything

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler
  1. Turn off the printer using the Power button.
  2. Use a pin to press and hold the Reset button at the back of the printer.
  3. Turn on the printer but keep the Reset button pressed for at least 5 seconds.
  4. Release the Reset button after a warning page is printed. After a few seconds, another page with the default IP address of the printer will be printed.
  5. Use this IP address to reconfigure the printer to the computer system.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Robert Passanisi sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 95