Eşyalarını Tamir Et Topluluk Mağaza

Released on July 21, 2011. Core i5 or Core i7 Processor. Thunderbolt. This unit is also used to run the Mac mini Server configuration.

204 Soru Tümünü görüntüle

Seçenekler

Missing SMC Resistor on Mac Mini board

Hi, a while ago I opened my Mac Mini and a SMC Resistor (I think) fell out of the chassis and I have just got around to finding where it’s missing. It seems to be labeled “d L8p” and I can’t seem to find it on Google. I’ve attached images of the board.

Block Image

Block Image

Update (04/15/2020)

Unfortunately, I lost the part. I believe it was that same capacitor (there's a whole bunch on the board), Mine is the Mac Mini 2011 2.5GHz, and when I compare the board here: Mac mini A1347 (Mid 2011) 2.5 GHz Logic Board it's almost exactly the same (coin battery is in the same place). The capacitor is there.

Update (04/16/2020)

Block Image

Block Image

I don’t have the best camera in the world but I hope that’s good enough. Let me know if you need a zoom on a certain section. I should add that I was running the mac headless (through VNC, which does work) after the board stopped displaying out, but I want to repurpose it again

Mac mini A1347 (Mid 2011) 2.5 GHz Logic Board Görseli

Ürün

Mac mini A1347 (Mid 2011) 2.5 GHz Logic Board

$224.99

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Well, I’ve got some news for you the part you circled is not a resistor it’s a capacitor. If you have something loose the part is not always present on the logic board where you pointed to as you can see here:

Block Image

Can you post an image of the part you have so we can see if we can identify it.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

4 Yorum:

I forgot to mention, the graphics stopped working after that fell off. I tried HDMI, Displayport and USB to HDMI and none of them even got a signal.

tarafından

@reedhaffner - Thats not good ;-{ This is an EMI noise suppression cap. I think you have a deeper issue here.

Lets get a full board picture of both sides at the highest resolution you can do so we can zoom in a bit without loosing the details. Look at the picture I posted as a reference.

tarafından

Updated the post

tarafından

Sadly, I don't seen anything missing on either side other than the cap. This version had issues with the Radeon GPU failing. At this point your only option is to live with it as you had or look at getting a replacement logic board. The last option which is a gamble is finding someone who can replace the cap as well as diagnose the cause of the display output failure if its something other than the GPU chip its self.

tarafından

Yorum Ekle

Seçenekler

@reedhaffner I realize that this is an old question but just for completion sake. The component is a Diode. It is a 40V 200mA schottky diode in a SMBG package

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

@oldturkey03 - Sorry its a tantalum cap not a diode look again.

tarafından

Yorum Ekle

Yanıtını ekle

Reed Haffner sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 7

Her zaman: 129