Eşyalarını Tamir Et Topluluk Mağaza

Second generation of CDMA iPad 2 with 16, 32, or 64 GB and Dual Core A5 Processor. Model Number A1397. Repair is detailed and requires heat and prying.

52 Soru Tümünü görüntüle

Seçenekler

I replaced the screen on iPad 2 and I received a Black screen!

Block Image

I replaced the screen in iPad 2,3.

After that I received a black screen.

The screen is completely black as when is off.

when I turn it I have the same screen. I don’t have illuminated light. Black complete as when is off!

i checked the LCD is working with another iPad so it’s not the LCD. Also I opened the motherboard and I saw that

I there is a blown fuse. Please took a look the picture.

Can we say that this fuse was blown??? Could somebody confirm it?

could be if I replace it will began to work????

Any suggestions will be highly appreciated!

thank you

Vinnie Venkov

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

No picture. Did you disconnect the battery before you unhooked the lcd and digitizer? It sounds like you shorted the backlight circuit.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

Thank you Allan. Also I"m sorry for the picture, now You can see it. I had a problem to upload the picture thats why wasn't there. So do you thing this could be a problem on the picture. Also pls give advise if You know where I can buy all those small parts fuse, transistors etc, if You know. Thank You so much for Your help!!!

tarafından

Yorum Ekle

Yanıtını ekle

Vinnie sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 59