What does I tried:
-replace the laser lens
-replace the ribbon cable
-rebuild the date base
-update the software in safe mode
Also replaced F6201 & F6202,and checked F6001.
I think those three are related to the disc drive, but all is well.By the way, my board is NVA-001
But nothing changed,the disc drive still not working
5:35
That happens to my PS4 pro even I put a disc in
Bu iyi bir soru mu?
İtibar: 16b
20
12
20
Hi!
Did you replaced the drive motor too ?
Anyway, I think you’re better off with an entirely new drive.. Make sure you transfer your PCB to the new drive.
Perhaps someone else know what exactly is broken, but you already replaced a lot of parts of the drive.
Bu yanıt yardımcı oldu mu?
Yes, I replaced motor too.
But I’m afraid that it’s motherboard problem.
Anyway, thanks for your reply.
@Koppie007, there is no daughter board (PCB) for the pro, it’s integrated on the logic board, has been this way since 12XX series PS4’s.
Jesse, Yes you are right! My mistake!
Son 24 Saat: 0
Son 7 gün: 3
Son 30 gün: 27
Her zaman: 1,748
