Ana içeriğe geç

The 2013 revamp of the desktop Mac series known as the Mac Pro.

117 Soru Tümünü görüntüle

Mac Pro 2013 A1481 Power Supply Test

I have a Mac Pro 2013 A1481 with a suspected bad power supply, I would like to test the bus bars from the PSU to the logic board with a multimeter. Would anyone be able to provide some instructions on where to place the black (ground) probe and red probe? and what the proper voltage readings should be? Please refer to the attached photo with numbers. Much appreciated

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
Yorum Ekle

1 Cevap

Filtre ölçütü:

No need for that. Your Mac Pro has Diagnostic LEDs on the I/O board. The 2nd one from the top will tell you if the PSU is supplying 11V.

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

how will the Diagnostic LED's on the I/O board tell us? I get no power at all when I plug it in.

tarafından

Yorum Ekle

Yanıtını ekle

Ray sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 10

Her zaman: 903