Ana içeriğe geç

The tenth generation Corolla (E140/E150) was released in Japan in October 2006. A narrow variant was available in Japan while wider versions were sold internationally.

28 Soru Tümünü görüntüle

Car doesn’t full engage reverse

Sometimes when i put my car in reverse it would’t fully engage reverse, so i would have to let go of the clutch and put it back to neutral then press down the clutch again then put it in reverse so it would fully engage reverse .

When it doesn’t fully engage , it would get stuck halfway and wouldn’t go down any further (i wouldn’t slam it and put it into reverse, wouldn’t wanna risk breaking the transmission or gears so i would repeat the steps to get it in smoothly) i have never drove with the reverse halfway not risking my first car . This is a 2008 Corolla S [Manual Transmission]

I’ve had people commenting telling me to just get an actual manual transmission car that aren’t mainly automatic like the corolla but this is my first car and i learned driving stick from this car.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

There is no synchro on the reverse gear. When it doesn't go all of the way in let out the clutch a little bit and it should drop in.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

MEGA BONER sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 14

Her zaman: 792