Eşyalarını Tamir Et Topluluk Mağaza

A Bluetooth speaker for mobile devices and tablets that can make phone calls for the paired device . Released in Fall 2014.

22 Soru Tümünü görüntüle

Seçenekler

What is the grey cable at the battery for?

Hi,

I replaced the battery of my Charge 2 and broke the middle PIN at the motherboard which is connected to the grey/ white cable of the battery.

Can someone tell me what for is this PIN?

Is it a protection for overloading?

I checked the loading for about 10min and it seemed to work (went 3 to 4 indicators)

And any suggestions to fix it? It’s too difficult with an soldering iron..

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Hey!

I can't understand the issue, however, as we are dealing with lithium batteries I would strongly suggest you to solder an enameled copper cable to the trace (watch some youtube video on board trace repairs) and connect it to the cable coming from the battery so as to not to lose any of the safety features on regards to the battery, these things are dangerous and should be handled with care!

Cheers, Enzo

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Julian Herrmann sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 8

Her zaman: 81