Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

Model A1059 or A1099 / 20, 40, or 60 GB hard drive / touch sensitive click wheel

interface port on iPod

My friend leaves his ipod classic plugged into his stereo in his truck at all times. It has been bumped a few times and the cable no longer makes a good connection all the time. Is there a way to reinforce the port on the logic port so it will not fail?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

If the cable is loose at the bottom of the iPod, the dock connector, then there is really not a lot that you can do. The little spring pins may just have worn out. I would try a new cable and see if that makes better contact. The only way to fix the dock connector is by replacing the logic board. Not a terribly expensive or difficult undertaking.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Matt Shirey sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 520