Eşyalarını Tamir Et Topluluk Mağaza

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1502 Soru Tümünü görüntüle

Seçenekler

Volume and Mute Button Depth is Off

I'm in the midst of reassembling my 3GS after replacing a cracked housing, and the volume and mute buttons don't seem to be protruding far enough after putting that assembly in.

I've tried and retried 10 times, with the same results each time. They both sit almost flush.

So I'm wondering - is this normal? Do they get pushed out to the correct depth after everything else is in the phone and is pushing on them?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
1 Yorum

Try a small file to make the opening bigger

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

I ended up answering my own question through testing. The answer is no.

I popped the bezel and assembly back into the old housing to see, and the buttons functioned perfectly.

So if any of you end up here with the same problem, it's because the unofficial housing is off spec.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

The after market casings will work. You just have to shim up the Mute, Volume, & Power buttons. Black electrical tape works great.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Ryan Rovick sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 8

Her zaman: 835