Ana içeriğe geç

Model A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 or 2.8 GHz Core i7 Processor

432 Soru Tümünü görüntüle

GPU heatsink black or burned

Block Image

I opened up my imac to see why it was not powering on. When I disassembled the heatsinks, I found that the GPU heatsink is black from under. Does it mean that the GPU is burned out is the reason for it not turning on whatsoever.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

That is a tell-tale sign the GPU chip has failed (shorted)

Bu yanıt yardımcı oldu mu?

Puan 0

7 Yorum:

Also I found that a few pins in the cpu socket were SLIGHTLY bent, so i aligned them back . Is it okay?

tarafından

So the CPU was also bad? Be very careful! as this pins are like a bent paper clip one to many bends it snaps! One bend is about it before it goes.

Sadly, once the socket is gone that's the end of the logic board.

tarafından

@danj So, if I bake the gpu at 200 degree celcius, could it revive the shorted GPU?

tarafından

@btwtg - Cooking your GPU after it has shorted out won't fix it. As they say you can't un-break an egg.

tarafından

@danj I've tested the PSU and it reads 12 V and 5.5V with diagnostic led #1 on.

I've even baked the GPU but it didn't help. CPU socket and CPU are fine with no missing/damaged resistors. So, do you think the problem is in the Logic Board or GPU. It would be very helpful if you can give me the schematics for this model.

thanks!

tarafından

2 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

BTW TECH sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 10

Her zaman: 101