Ana içeriğe geç

2.3GHz, 2.6GHz, or 2.7GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.7GHz) with 6MB shared L3 cache.

561 Soru Tümünü görüntüle

Where can I find U8030 ic for MacBook Pro

Hello. Can anybody help me to find this 6pins ic chip model number of if anybody can find where to buy this chip? It is called U8030 in board viewer. Need to find new or used chip. In this Macbook I have a broken U3080. Than you.

Block Image

Block Image

Block Image

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi @inspiraattori

The part you are referring to is a load switch on your 3.3V S0 rail.

The part number is TPS22924C. You can type this in to eBay and you will find the appropriate replacement.

Here is one for you

eBay item number: 113635372777

Bu yanıt yardımcı oldu mu?

Puan 3

3 Yorum:

Thank you very much for your answer. I purchased that part from eBay. Now.. because I’m impatient.. I removed U8360 from iPad air and installed it to this Macbook pro and wow now Macbook is alive! But my question is now is it safe to keep this iPad air U8360 in this Macbook or should I wait till TPS22924C arrive from eBay? Again than you for your help.

tarafından

hey! I've got a similar problem. I think that this IC is broken on my mainboard too, but how were you able to replace it? I'm trying to remove it with my heat gun set to 415°C and air flow set to 50%, but it's not moving after a few minutes of applying heat :-( and I don't want to damage my mainboard :-) thanks for your help!

tarafından

I would apply some flux to help reflow the unleaded solder under the IC and crank up the airflow higher. First heat up the area around the IC pointing your heatgun from further away so it doesn't get a heat shock.

tarafından

Yorum Ekle

Yanıtını ekle

Mobilefi sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 9

Her zaman: 312