Eşyalarını Tamir Et Topluluk Mağaza

Released April 2010 / 2.4, 2.53 GHz Core i5 or 2.66 GHz Core i7 Processors

590 Soru Tümünü görüntüle

Seçenekler

New keyboard installed, but some keys are too sensitive

I bought the ifixit repair for the keyboard and installed it. Before it didn’t turn on due to coffee spill, now with the new part it does turn on, but some keys (3-4 keys is all) are SUPER sensitive. Like you can just run your fingers over the keys and not press and they’ll type. My son is using a USB keyboard for now, but I think I’ll have to tear it back apart to see if I can find a reason why the keyboard isn’t working properly. Has anyone seen anything similar?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
1 Yorum

I have this problem too! All you have to do is brush the keyboard and it all guys haywire. Sounds like a defect I'm about to ask for an exchange…

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

You’ll need to go back in and loosen the keyboard screws, then tighten them up just snug working from the center group outwards. I’m suspecting you have either distorted the case by pressure or the screws are building tension on the case.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

also ( im not sure) but if there are different length screws in the disassembly to put them back in the right spot

tarafından

@logixal - The field of 45+ screws are all the same make sure you haven't bent the aluminum uppercase frame, as I've seen a few which needed straightening.

tarafından

Yorum Ekle

Yanıtını ekle

Neil Young sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 15

Her zaman: 373