Ana içeriğe geç

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1169 Soru Tümünü görüntüle

iPhone backlight not working anymore

Hi,

i have a problem with my iPhone.the lcd backlight is not working anymore.the iPhone felt down, and the dislpay incl. the touchscreen was destroyed. so i bought new touch and lcd set...

after replacing my destroyed lcd, everything was working fine, incl. backlight.

But then the backlight went off.. i opened the iPhone again...seated all cables again into the iPhone, and it worked again...but only for a few minutes, till i moved/shaked the iPhone...

i guess that the connection for the backlight is not well connected...but i don´t know what cable is responsible for the backlight connection...I uploaded 2 pictures...can you say me which connection on each picture is for the backlight?

On the picture nr2 the thing numbered 1 seems a little bit destroyed...

Picture1:[URL|

http://sebastian-eitel.de/media/1.JPG]

Picture2:[URL|

http://sebastian-eitel.de/media/2.JPG]

Thanks,

Sebastian

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 2
2 Yorum

hi sebastian,

besteht das problem noch oder hat sich die sache erledigt ?

es wäre schön diesbezüglich nochmal eine rückmeldung zu erhalten oder falls möglich eine antwort zu akzeptieren, sofern diese zur lösung beigetragen hat. es geht letztendlich darum das wir nach und nach die ungelösten abarbeiten wollen. falls das problem noch bestehen sollte - kein thema, schreib einfach nochmal was dazu und ich versuche dir das alles orgendwie zu lösen. gruß markus

tarafından

Where is pic1 from?

tarafından

Yorum Ekle

10 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi,

finally i didn´t get it working.

I just sent the iPhone to a iPhone repair shop, and they repaired it for me.

He wrote me, that there were more errors within the iPhone...

Well, now it´s working!

Thanks for your answers anyway.

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

hi sebastian, good that it works again, i would suggest that you accept your own answer, since no other answer was the right one (that way your question will go out of the "unresolved tab" - i think the "coil" was gone in your phone and thats why the backlight was not working. viele grüße aus mittelfranken

tarafından

Yorum Ekle
En Yararlı Yanıt

this will fix it if it is a 3Gs...

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

My sons 3gs was water damaged and the backlight stopped working. I was told it was the LCD, so I gt a new one off ebay for £22 and fitted it myself. It is now working and the connection for the new LCD was number 1.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

if replacing the lcd doesn't work. it could be there is a burnt pin on the lcd connector on the board or the backlight coil is bad. either one requires soldering on the motherboard and is pretty difficult.

but usually either one of these is due to liquid damage.

try applepierepair.com. they are masters at this stuff

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

I guess is a defective/damaged LCD. Try to turn the iPhone on and put under the sun light or under another good light source and watch if you can see something, I mean a a very tenuous image.

Bu yanıt yardımcı oldu mu?

Puan 0

3 Yorum:

hi,

under the light i can see the pictures on the lcd...

and sometimes also the backlight is working...

that´s why i thought it´s not well connected, cause when it´s working it´s only workng for a few minutes, till i touch the iPhone somewhere...

tarafından

any idea, how the backlight gets its power or data?

tarafından

No idea, but you must test with another LCD or a complete Touch/LCD (it´s more easy to try) from an iPhone´s friend for example, to see if the problem persists.

tarafından

Yorum Ekle

I repaired an iPhone using a complete Touch/LCD and the phone seems to work except for the backlight. As there is only three cables from the screen to the rest I wonder which one of these that powers the backlight?

Second question could of course be - is there any risk that I damage something else during the process that could effect the backlight?

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

please post this as a new question - that makes it easier for everybody - your problem is most probably a different one than this one

tarafından

Yorum Ekle

buy a new lcd digitizer that should do the trick,

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

this answer is not useful - the digitizer and the lcd are two different things

tarafından

Yorum Ekle

http://www.youtube.com/watch?v=Ng9qQEUj9...

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

it has sorted the problem but isn't ideal. the 6r8 is the right part but it should be soldered correctly.. this is half a job!

tarafından

Yorum Ekle

http://www.youtube.com/watch?v=rZZawHT1E...

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

6r8 is the right part but should be soldered to the board correctly.. this isn't the ideal fix for the problem.

tarafından

Yorum Ekle

Block Image

for Iphone 3G have different coil and IC specs you cant just use the 3GS coil in 3G it will cause damage and possible fire.

you can buy the 3G coil and backlight IC with the correct specs from here

for less than 5$

Block Image

Block Image

Bu yanıt yardımcı oldu mu?

Puan 0

1 Yorum:

cyberdoctormd, be careful with posting your URL all over. Could be looked upon as spam. Place the URL into your profile and link your answers to that. Many people that answer questions, have their own business but do not use this forum to increase their business

tarafından

Yorum Ekle

Yanıtını ekle

donulfo sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 4

Son 30 gün: 5

Her zaman: 62,594