Eşyalarını Tamir Et Topluluk Mağaza

The Mac Pro First Generation is an Intel Xeon-based workstation computer manufactured by Apple Inc. The first generation model includes the machines from 2006 through 2008.

317 Soru Tümünü görüntüle

Seçenekler

Re-Installing OS and Spinning Wheel Is Frozen

I was given a 2008 Mac Pro today. I put a hard drive in it, made a MacOS USB Drive and tried to install the OS. Upon booting from the USB, I’m greeted with the normal Apple screen. The spinning wheel shows up, spins a few times , stops and doesn’t proceed any further. I have tried zapping NVRAM, re-downloading and remaking Installation USB, tried different USB drives, swapped RAM modules and still the same. I am attempting to install OS Mavericks since I know it supports Early 08 and up.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0

7 Yorum:

What is the drive you put in? Make & Model

tarafından

It is a WD Blue 500GB

tarafından

Is this the drive: WD Blue

tarafından

It's an older WD Blue

tarafından

@goetzsage2 - Can you give me the model number of the drive.

tarafından

2 tane daha yorum göster

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Why I had asked is many people forget the older Mac Pro systems SATA ports can only support SATA II (3.0 Gb/s) or SATA I (1.5 Gb/s) drives. The newer fixed speed SATA III (6.0 GB/s) drive are not able run in your system directly. You would need a PCIe SATA board.

Are you able to setup the drive externally on your other Mac system using something like this: Universal Drive Adapter

Universal Drive Adapter Görseli

Ürün

Universal Drive Adapter

$24.99

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

goetzsage2 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 8

Her zaman: 163