İtibar: 1
2
1
I have a EVGA 1070 with a burned out resistor and now it doesn't display anything. How much for microsoldering a new resistor?
I think it's a resistor and it might have been the cards fault. Manufacturing fault
Bu iyi bir soru mu?
İtibar: 782,8b
1,1b
893
2,3b
@pewdiepie it’s not a matter of how much it will cost it’s a matter of what is it. Without schematics nobody will know what type of component this is and what it’s values are. Also you can not check the cause of why it got destroyed. There is more to component repair then just changing parts. You first have to identify what motherboard this is, who made it and are there schematics available. So, check your board. There may be markings printed on it that will help with that. Post some good pictures of those stickers on the board and check the whole board on both sides.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 1
Son 7 gün: 3
Son 30 gün: 7
Her zaman: 271
@pewdiepie sure it could be a resistor but you need to know what values this « resistor » has. You cannot just solder any resistor in there.
oldturkey03 tarafından
I know I just want to know how much it costs so I can take it to an expert
Urmas Küün tarafından