Eşyalarını Tamir Et Topluluk Mağaza

Samsung'un onuncu amiral gemisi Galaxy telefonu, Mart 2019'da piyasaya sürüldü. Android 9.0 (Pie) ile birlikte geliyor.

71 Soru Tümünü görüntüle

Seçenekler

Galaxy S10 not using full capacity of new battery.

Hi,

I recently bought a new battery for my Galaxy S10 from Ifixit. The install went fine but the phone seems to believe the new battery is the same capacity as the old one. I’ve been looking at the charging info on the Accubattery app and its only putting 2900Mah of charge in the battery but it should be going to 3300Mah with the new battery. I followed the calibration instructions sent by Ifixit (Charge to 100% + 2 hours, fully discharge then charge fully) around 3 time now but still getting the same results. I even used the Samsung quick reset feature (Dial *#0228# and use Quick Start) but get no change in the battery capacity. Any help would be appreciated, I fell like I’ve been sent a used battery that someone else has returned.

Thanks

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

I would reccomend to disregard the app, and peform a simple drain test. Let the battery fully charge + 30 min or so. Then simply put a youtube to play none stop in the background and take note every 15 min of the battery %.

Usually a 6% drop/hr is typical for a proper functioning battery.

If it’s much higher then there may be a manufacturers defect.

The reason I suggest to disregard the app is because there many variables that commes into account about the accuracy of that reading.

I hope this helps

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Daniel Roosa sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 6

Son 30 gün: 34

Her zaman: 964