Eşyalarını Tamir Et Topluluk Mağaza

The smaller of Apple's MacBook Air laptops featuring dual microphones and 802.11ac Wi-Fi connectivity.

149 Soru Tümünü görüntüle

Seçenekler

I have the black screen of death

I initially did an erase and install with disk utility and the computer booted up fine.

The next day I got the blinking question mark in the folder at start up. I restarted and since then I’ve got nothing but the black screen.

I have tried to boot in recovery (command R) I have gone through the NVRAM and PRAM reset protocols. Nothing.

I have created a bootable thumb drive with Mojave on it and tried to boot to the thumb drive. Nothing.

I don’t know what OS is on the device. It may have been High Sierra. I have a new drive, not installed yet, and can make a bootable drive with High Sierra on it. Can any one assist with some step by step instructions as to what can be tried next?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

I think you need to go back one more version as High Sierra is the first release of APFS. You should create a bootable OS installer with Sierra as that’s the last HFS+ release. The systems firmware likely didn’t get updated so it has no idea how to boot up under anything else but HFS+

OK, here’s a link to the older OS versions How to get old versions of macOS Download the Sierra installer

Now format a 32GB Thumb drive with GUID and a journaled file system using your working Mac. Then follow this guide to create the bootable Image How to create a bootable macOS Sierra installer drive

Now give that a try!

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Matthew Agostinelli sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 5

Her zaman: 26