Eşyalarını Tamir Et Topluluk Mağaza

The Wi-Fi only version of Apple's iPad 6, released in March 2018. Available with 32 and 128 GB storage options. Features a 9.7" Retina display and 64-bit A10 fusion chip.

150 Soru Tümünü görüntüle

Seçenekler

After replacing the screen, some parts aren’t tactile

Hi,

I replaced an iPad 6 screen but some parts of the screen are not tactile anymore.

Block Image

Here is an example in Notes, where you can see the two parts that doesn’t work anymore.

FYI Someone gave me this iPad; He forgot it on his car roof and someone drove on it.

Thanks!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

I have had this occur in the past with screen replacements. Each time, the issue was at the connector. Under the scope, you could see the pins not connecting securely with the ribbon cable. Not sure that this may be the issue you’re having, but it would be worth checking.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

Thank you for your help!


You were right, the pins were of very low quality, some broke when I opened the screen again.

Block Image

I just asked for a return & refund.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Lulucmy sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 43