iPhone unable to activate, NO IMEI + continous searching.

Question

iPhone X

4 Kasım 2017'de satışa sunulmuştur. Model A1865, A1901. GSM ya da CDMA olarak 64 ya da 256 GB kapasitelerinde, Gümüş ya da Uzay Grisi renklerinde satılır. ("iPhone 10" olarak da telaffuz edilir.)

1202 Soru Tümünü görüntüle

Kaspar @kapuzta

İtibar: 1

4

3

Gönderildi: 7 Eyl 2021

Seçenekler

iPhone unable to activate, NO IMEI + continous searching.

Hello.

I have recieved iphone x with light water damage.

When i power uo the phone and click the i button there is IMEI shown and after trying to activate it - The result is “Unable to activate” and after that the IMEI is gone.

Phone wont recognize the SIM aswell - continous searching..

Anyone have experienced similar case?

Now i discovere one thing.

When doing flash with 3utools there comes an error up 80% (Device did not accept baseband).

That rules out that the problem is with BB? BB CPU ?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

1 Yorum

Hello.

Little update :

IMEI is present sometimes in the "i" section and i can see it in 3utools aswell.

That means baseband is still functioning?

Kaspar tarafından 12 Eyl 2021

Yorum Ekle

3 Cevap

Hello.

Little update :

IMEI is present sometimes in the "i" section and i can see it in 3utools aswell.

That means baseband is still functioning? — Kaspar

Chris Stables @imicrosoldering İtibar: 50,7b 8 14 101 · Answer 1 · 2021-09-07T15:27:10-07:00

En Yararlı Yanıt

Chris Stables @imicrosoldering

İtibar: 50,7b

8

14

101

Gönderildi: 7 Eyl 2021

Seçenekler

You will need to split the board and check for corrosion and oxidisation from the liquid. Clean the pads and install into test jig. If it still has no IMEI you will have to consider re-balling “Baseband CPU” and the” U_WTR_E” IC.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

1 Yorum:

The board is already splitted. No corrosion there at all.

Kaspar tarafından 7 Eyl 2021

Yorum Ekle