Eşyalarını Tamir Et Topluluk Mağaza

Early 2011 Model: A1278 / 2.3 GHz i5 or 2.7 GHz i7 processor

784 Soru Tümünü görüntüle

Seçenekler

Burned SMT on MacBook Pro 13"logic board 820-2936-B? How could it be?

Hi, everyone. I have a macbook pro A1278 i5 2.3GHz for sometime, it won't work on a sudden yesterday . So, I take out the logic board and have a look, it seem that one of the SMT burned,(see in the pictures , get a burn black marks.)

I have no idea what is going on. If I put on the charger, the charger give a green light, no fan spin, and the burned SMT get real hot. I assume the SMT should be replaced, but do not know the specification. The words on the SMT is KO 336 16k 117, it should be the brand Kemet, I do a lot of google search, but no luck , nothing specific is found.

The logic board is 820-2936-B. Does anyone have any idea? and what cause it to be like this? any fix?

Block Image

Block Image

Update (10/15/2021)

Block Image

so after the changing smt, the mac back to life. Thank you for the information.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Sadly your CPU’s power logic is messed up. The component you’ve pointed to is a capacitor C7530 as you can see here in the board view:

Block Image

And if we look for it within the schematics we can see C7530 is a 33UF 20% 16V POLY-TANT CASE: D2E-SM and is part of the PHASE-2 power section.

Block Image

At this point you could have a deeper problem as well, do you have the skills to do micro-soldering? It might be best to find someone with deeper skills to fix your logic board.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

3 Yorum:

Thank you for your reply, I really need it. I can do the SMT replacement with a heat gun , and I am ok with the tool. I think I will replace the burned SMT and see what we get, because I have no idea what else can be done . Hope it would be ok again, I will keep update the condition of the MBP once I try something.

However, I also what to ask if any SMT with 330UF and up to 16V is ok for the replacement? Because I only find SMT 7343 (D type), they say it is also 330uf and up to 16v.

tarafından

@Ant Bee - Here's the needed part: 33UF,16V KEMET 16 VDC B Case 20 % Tantalum Capacitor

tarafından

Thank you, let try if it would work. I will update the situation once I get the part and make the replacement.

tarafından

Yorum Ekle

Yanıtını ekle

Ant Bee sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 6

Her zaman: 361