Ana içeriğe geç

Model A1040 / 10, 15, 20, 30, or 40 GB hard drive / four touch-sensitive LED backlit buttons above touch wheel

97 Soru Tümünü görüntüle

The screen is white.

When I turn on the backlight, the screen only shows white. I can hear the touch wheel clicking as I use it, and the function buttons still light up

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

@pod_boi could be the dispaly since the backlight is a separate circuit within the display. I would replace it and see what happens.

Anything other than the screen would be a cable connector issues (check for corrosion etc.) or even deeper into the logic board circuitry. Since there are no schematics for this iPod we can only hope it is “just “ the screen.

iPod 3rd Generation Display Replacement

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Hunter Wilson sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 34