Eşyalarını Tamir Et Topluluk Mağaza

The Motorola Moto Z3 Play was released in June of 2018. It has a 6 inch screen and a non-removable Li-Ion 3000 mAh battery. Its rear camera is 12MP and its front camera is 8MP. Model number XT1929-3, XT1929-4 and XT1929-8. "XT1929-3 NA XT1929-4 NA XT1929-4 NA XT1929-5 LATAM XT1929-6 LATAM XT1929-8 EMEA/APAC"

14 Soru Tümünü görüntüle

Seçenekler

Repair connector on z3 play

Was replacing crack screen and tested by inserting ribbon in connector and it worked. When I took off to apply adhesive I broke piece off on connector and now it will not work. Am I able to replace connector on motherboard?

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

@micbob4 that is Motorola connector 09014221001W which is a CONN,ZIF, 61 PIN,0.9MM HIGH, 13.8 LONG. The only online connection I can find is on here You can of course try to match it with something that mouser.com or digikey.com may have. Also, you can always try and purchase a broken circuit board for the same model phone and use that to harvest the connector from.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

Robert kidd sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 130