Eşyalarını Tamir Et Topluluk Mağaza

25 Eylül 2015'te yayımlandı. A1688/1633 modeli. Bu cihazın tamiri eski nesillerinkine benzer; tornavida ve kaldırma aletleri gerektirir. GSM ya da CMDA olarak / 16, 32, 64 yada 128 GB kapasiteli / Gümüş, Altın, Uzay Grisi yada Rose Gold (Gül Altın) seçenekleri mevcuttur.

2695 Soru Tümünü görüntüle

Seçenekler

iPhone 6s is stuck in boot loop after battery replacement.

My iphone 6s had a bad battery when I bought it from one of my friends. I was aware of it too but was just looking for a backup phone. One day my 6s just stopped charging and eventually died. Tried multiple cables to see if maybe it was just a bad cable even tho they all worked with my Xr. Eventually I just bought a battery and replaced it. It started up and worked but wouldnt charge again. So I got the charger port replaced. After I was finished It started charging but got stuck in a boot loop. The battery holds a charge even when unplugged the phone still does it till I force the buttons down to force shut down and then it turn on and do the same thing till u force it off fast enough it stays off. Couldn’t figure out really what to do abt it at this point.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
1 Yorum

All you had to do is press and hold the power button for 5 minutes and it would've reset the battery state and come back to life. It's a typical behaviour of any iPhone once the battery has been replaced... I know it's too late for you now but let's leave this info here for others to benefit.

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

If you are sure the battery is not faulty and the connector is seated properly you will need to try an update as the 6s sometimes needs one after a faulty battery.

·         Have iTunes open on pc or mac with lightning cable connected just to PC.

·         With the phone turned off, Hold the home button in and connect the cable.

·         Wait for recovery mode to show up.

·         Update the phone.

If this doesn’t work it will more than likely be a parts problem either battery or charge port.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

All you had to do is press and hold the power button for 2 minutes and it would've reset the battery state and come back to life. It's a typical behaviour of any iPhone once the battery has been replaced... I know it's too late for you now but let's leave this info here for others to benefit.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

do i hold the power button for two minutes when it is on or do i shut down first then hold the power button for two minutes after it is off?

tarafından

Yorum Ekle

Yanıtını ekle

eli sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 gün: 28

Son 30 gün: 111

Her zaman: 2,163