Ana içeriğe geç

How do I replace the camera lens bezels?

The long and short is that I ran my phone over with my bike. Had I had a slighty more durable case, everything would be fine. The phone is otherwise flawless - a testament actually to the durability of the phone (something I thought I’d never say…).

In any case, I see there are the lens replacements (with bezel) available from the store (see link). However, there are no guides to actually do this procedure. Is it worth my time or should I just install a new lens?

Block Image

iPhone 12 Pro Max Rear Camera Lenses and Bezels

iPhone 12 Pro Max Rear Camera Lenses and Bezels Görseli

Ürün

iPhone 12 Pro Max Rear Camera Lenses and Bezels

$12.99

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

It’s not something you’ll want to do if you don’t need to. It’s a very delicate procedure. You’ll want to heat up the adhesive of the broken bezel enough so you can carefully remove all the broken glass and adhesive. Be very wary not to scratch the camera lens during glass removal. If you’re worried about scratching the camera lens, you can remove it prior to chipping the glass. Clean it up a little more with alcohol. Once the surface is clean, putting the new bezel on is pretty straight forward.

Bu yanıt yardımcı oldu mu?

Puan 0

7 Yorum:

Does this mean the bezel is externally replaceable; it does not require disassembly of the phone, only removal of the bezel directly?

tarafından

Yeah. You don’t have to take anything apart. It’s pretty much a piece of glass that’s glued to the outside of the phone. If you want to be extra careful and take the cameras out, you’ll need to open up the phone. In some cases, it’s easier to take the cameras out and push the bezel out from the inside. But from your picture, it looks like you’ll have to just pick at the outside.

tarafından

Thank you. But this isn't quite the question i was asking. I am talking about the metal bezel surrounding the glass. I have had the glass replaced already but the selling of a replacement bezel indicates that the bezel is itself replacable.

tarafından

Colin, you are describing how to replace the lens. The bezel is the part that holds the lens. I am trying to figure out how to do this as well.

tarafından

@cirofirvine did you have any luck with this?

tarafından

2 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Archie Campbell sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 17

Son 30 gün: 48

Her zaman: 2,784