So in the process of changing the shell of my switch lite, i accidentally took off the clamp that holds the ribbon cable connecting the left side motherboard to the main motherboard. Is there any way to properly fit the clamp back into the socket?
Bu iyi bir soru mu?
İtibar: 247
17
1
2
I had the same this happen to me in a MacBook.
Putting the clamp back on is possible but very finicky and difficult. What I would recommend doing is putting the cable back into place and securing it with a tiny amount of electrical tape.
Good Luck!
Bu yanıt yardımcı oldu mu?
I tried this with the thick ribbon next to the game card reader and so far no dice..
This same thing happened to me, causing the backlight not to work. It’s very hard to add back on, but it is possible.
Son 24 Saat: 1
Son 7 gün: 6
Son 30 gün: 49
Her zaman: 1,732
