Eşyalarını Tamir Et Topluluk Mağaza

The Early 2009 Mac Pro—also known as the Mac Pro 4,1—introduced Intel's Nehalem architecture to Apple's line of professional desktop computers in March 2009. The Mac Pro 5,1 used the same interior design but received further CPU updates in 2010 and 2012.

202 Soru Tümünü görüntüle

Seçenekler

Apple Mac Pro 2009-2012 logic board

Hi everyone,

I get little confused about this line of Mac Pro. If I am right (if I am wrong please correct me with some example):

2009 / 2010 / 2012 have SAME logic board (the big board what is attached to the case) only diference is the CPU/RAM board ? That is what making difference between 1CPU/2CPU’s ?

So if I will have 2009 1CPU Mac and I will swap the 2CPU’s/RAM board (just the board with CPU’s and RAM what “slide in”) from 2012 it will work and I will have 2012 Mac Pro ?

Thanks a lot for your time guys.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 2
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

So can I use CPU’s board from 2012 on 2009 ? Thanks

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

You cannot. You can flash a 4,1 to a 5,1 as @guardian10 said, but it will freak out and ramp the fans up due to the smc not knowing exactly what it is if you use a 5,1 tray in a 4,1 (and vise versa).

tarafından

Thanks a lot for clarification mate.

tarafından

Yorum Ekle
En Yararlı Yanıt

Seçenekler

They have slight differences on the logic board, but a 4,1 can have its firmware flashed to 5,1.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2
Yorum Ekle

Yanıtını ekle

Rob sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 10

Her zaman: 254