Eşyalarını Tamir Et Topluluk Mağaza

Repair guides and support for weed whackers, also known as string trimmers, weed eaters, edge trimmers or line trimmers.

87 Soru Tümünü görüntüle

Seçenekler

Weed whacker wouldn't stop so I hit the kill switch, now it won't star

I used a gasoline powered weed whacker today fir my first time. At one point the engine started revving like crazy by itself and letting go of the throttle didn't slow it down so I flipped the kill switch. Now I can't start the weed whacker anymore. Being new to weed whackers, I dont know what to do.

A mistake I may have made is I didnt switch off the choke switch after the engine had started. I tried switching it off once and the engine stopped, so I just left if on this time.

What might the issue be here and how would I diagnose and fix it?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
2 Yorum

Do know the manufacturer or the specific brand of the weed whacker?

tarafından

I cant figure this out, it has a sticker that says "DIFER DF 52" on the shaft, I cant find any information about the manufacturer "DIFER"

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Hello Dominic,

I would let your engine sit for a few hours, clean off any debris and try to start it again, the choke needs to come off when it is finished starting, or you could cause damage to your engine. It should start after letting it rest. Can I ask would it try to turn over and didn’t start or did it not try to start at all?

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

Hi Repair Skeleton. It did not want to start at all.

tarafından

I will let the engine sit a few hours and try again, thanks!

PS, is this because the engine is probably flooded and needs time for the gas to evaporate, or something else?

tarafından

Yorum Ekle

Seçenekler

Yes, it likely flooded. After the engine is warm, if the choke is still on it will run fast. But usually, it will choke itself to death. It could also be that, since it sat a while since last used, the throttle linkage is gummed up.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

It turns out that the part with the string for starting the weed whacker was worn out so needed to replace that, now it works fine. My friend who owns the weed whacker was able to tell when he pulled the string that that was the problem.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Dominic Fagan sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 9

Son 30 gün: 24

Her zaman: 207