Ana içeriğe geç

Model A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 Processor, ID iMac13,2

330 Soru Tümünü görüntüle

Monitor has vertical lines at start-up.

At the startup chime the display comes on with these vertical lines. As the boot-up continues the screen color changes indicating the system is running. I accessed the the diagnostic LEDs, all 4 are lit.

Do I need a replacement display or logic board?

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Your display panel is damaged, you can prove that by hooking up an eternal display as the image on it will be clean. This is a common issue with the newer Thin series as the display is glued on so if you don't use the correct tools and techniques to remove it you can easily damage the display.

Here's the needed tools:

And Parts:

And here's the guide which you need to follow: iMac Intel 27" EMC 2546 Display Replacement

Plastic Cards Görseli

Ürün

Plastic Cards

$2.99

iFixit Opening Picks (Set of 6) Görseli

Ürün

iFixit Opening Picks (Set of 6)

$4.99

iMac Intel 27" (2012-2019) Adhesive Strips Görseli

Ürün

iMac Intel 27" (2012-2019) Adhesive Strips

$19.99

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

Yes, I believe you are correct. The trick in my situation was the external monitor would not actually work unless I disconnected the display panel from the logic board.

tarafından

Yorum Ekle

Yanıtını ekle

Jack Granato sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 8

Son 30 gün: 20

Her zaman: 621