Ana içeriğe geç

Repair manuals for HP's "Mini" series of small form factor netbook computers.

52 Soru Tümünü görüntüle

hp mini 2133 won't turn on

I have an HP Mini Note 2133 that will not power on. When I plug in the AC adapter the light right next to the DC jack will light up blue/white then turn off after 1 second if there is no battery installed. If the battery is installed, the battery charge/orange light with light and stay on.

Update (10/01/2022)

that didn't worked. Btw the laptop started ding this after a reflow

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

@George kts

If you had mentioned in your question at first, that the board had been "reflowed" I wouldn't have posted the answer that I did.

Reflowing boards can cause problems if you get it wrong e.g. components losing connection with the board, components connections going short circuit because solder has flowed between them etc

You will need to get hold of the schematics for the motherboard (what is the make and model number of the board - not the HP part number - printed on the board) and then use them to trace the power rails to see what's happening.

Bu yanıt yardımcı oldu mu?

Puan 1

4 Yorum:

@George kts you are stuck between a rock and a hard place with this. What did you check before you decided to reflow? Are the issues the same before and after reflow? How did you do the reflow? As @jayeff already stated, you will need the schematic for your motherboard to dig down on this.

tarafından

the screen was blinking white and I heated the whole laptop

tarafından

@George kts and how did you do this "I heated the whole laptop"

tarafından

I got heat gun and heated the mb

tarafından

Yorum Ekle

Yanıtını ekle

George kts sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 4

Her zaman: 84