Eşyalarını Tamir Et Topluluk Mağaza

The Apple Watch Ultra with its 49 mm case seems like a roided out Apple Watch. It was announced on September 7th, released on September 23, 2022, and is the first Apple Watch certified MIL-STD 810H and EN13319. It features a customizable Action button and L1 and L5 GPS.

7 Soru Tümünü görüntüle

Seçenekler

The hole above the crown

All the holes on the Apple Watch ultra are seated with a mesh spanned across the holes and looks to be seated with a tight span.

The mesh in the hole above the crown looks wrinkled. Can someone confirm this is normal and not a defect? Or is this some sort of a bellow?

Block Image

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Could be the valve toa evacuate water after you've been swimming. Should be a setting on the watch for it.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

Looks like that hole is leading to a barometric sensor. It also has a route to the band slot.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

Does it look like a wrinkled piece of foil?

tarafından

@Ferdi Mendes

the drilling might make it look like it’s wrinkled, but there is nothing "wrinkly" on/in that hole. The barometric sensor itself looks like a very tiny speaker cap.

tarafından

Yorum Ekle

Yanıtını ekle

Ferdi Mendes sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 16

Her zaman: 698