1 How to reset 2 LED fault code after cell imbalance
Battery failed with 2 LED pattern 1-0-1-0. Diagnosed that one cell was at 3.3V, other 4 at 3.6V. so Rebalanced all cells to 3.7V using balancing charger, but fault code persists, like it's been latched on. Any idea how to reset the processor to recognise that the cells are rebalanced ?
Bu iyi bir soru mu?
Puan
2
I have exactly the same problem and I have balanced my battery too after replacing the bad cell. There appears to be a 3.3v serial pinout on the battery but I have no idea at this point what to do next.
13chars tarafından
Suffering through same problem. Led 1 and 3 shows and charging dock shows red blink. Any help would be appreciated on how to reset memory. Battery pack is very expensive.
Alex tarafından