Ana içeriğe geç

I spilled lemon oil on my dryer went down the back crack blew breaker

ELECTRIC DRYER!!! I waited a day and plugged the dryer back in then reset the breaker and it immediately popped off again. I waited 2 more days, same thing. I took the top back off and saw a black mark where the oil dripped down a wire. I cleaned the oil off and painted on the burn, but it still pops off! I need to take the bottom back off and clean the oil and see,,,,!!!?I don't know what to look for?!!! Plus, I don't know what to do when I find something! HELP PLEASE!!!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Was the black mark on the wire or on the circuit board the wire connects to? The oil may have damaged the board, probably the control panel.

Bu yanıt yardımcı oldu mu?

Puan 2

1 Yorum:

Christopher Sean Harris, as soon as I read your question I realized there was a control panel! I found a video online and cleaned all of the parts that were cleanable. It works now!!! Thank you so much! Never would have gotten there without your question. If it blows up again, I will be back!

tarafından

Yorum Ekle

Yanıtını ekle

Jayme Farrar sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 7

Her zaman: 42