Ana içeriğe geç

Coffee makers from the italian manufacturer De'Longhi.

78 Soru Tümünü görüntüle

DeLonghi Magnifica: no water coming through

Hi everyone,

I got a DeLonghi Magnifica 2 months ago, used it for about 1 week, then emptied and cleaned the tray and left the machine for 6 weeks or so.

When I turn on the machine now, there is never any water coming through, neither upon start-up nor when I press a button. Instead, the water light starts blinking (the reservoir is full). According to the instructions, this indicates too fine a grind. I initially thought the grinder needs to be cleaned, but the machine does push ground coffee through into the tray whenever I press the button, and there is no water when I turn the machine on either, so it seems water-related to me.

Does anyone know what this could be? I thought I might need to descale the machine, but it seems like there is a separate light to indicate that, and since I only had the machine for 2 months and used it for only 1 week, that seems unlikely to me.

Thanks!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

1 Yorum:

I have the same problem. The machine has been left for quite a long time. When I turned it on, no water came through. The water light starts blinking. I checked the flow meter and it was completely dry. Seems no water went through the flow meter. Anyone has any ideas? Thanks.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:

It could be an issue of the flowmeter. Sensor defective? Clogged? Connector twisted by 180°? Is it an ECAM or ESAM? For ECAM see this guide.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

SMT sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 61

Son 30 gün: 254

Her zaman: 3,434