Eşyalarını Tamir Et Topluluk Mağaza

Guides and repair information for Kenwood mixers.

99 Soru Tümünü görüntüle

Seçenekler

Mixer model kmx50 accelerate and slow down speed control no reaction

So far have replaced with new electrical module where all components are fitted together like speed control dial and capacitors and problem not solved, mixer it self have only three electrical components the main module and speed sensor and the corpse open sensor, there should be easy fix otherwise the motor is defective but is running continuesly at low speed so difficult to say is defective.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

SOLVED UPDATE

Problem was the speed control sensor located above on the motor with three cables, never thought such tiny part make the stand mixer defective. This sensor is installed on more kmix models so if you have such issue then you know where to look.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

1 Yorum:

My mixer same thing, speeds up and then slows to 30%. The sensor between the fan and motor was rubbing on the magnet and wore away the hall effect sensor. I got a replacement item KW710626 about £10 and that fixed the problem. I fixed sensor board in place so sensor no longer rubs.

The hall effect sensor had marking 44e 106 if you want to find just the part to replace (3 legged small square device)

tarafından

Yorum Ekle

Yanıtını ekle

George sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 gün: 11

Son 30 gün: 37

Her zaman: 411