Ana içeriğe geç

Model A1013, A1052, A1085, or A1107 / 1440x900 screen resolution

121 Soru Tümünü görüntüle

Location of jumper pads for logic board for internal restart

I got in a A1107. Just fan noise on startup. Did the usual battery tests, AC stuff, SMC, tried PRAM reset to no avail. Removed hard drive for data recovery and get flashing lights on my universal adapter but cannot access the hard drive. My thinking is that this faulty hard drive may have prevented booting. Can someone confirm this? Also are there power jumper pads on this machine and where are they located?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
1 Yorum

I don't have this logic board to identify the two power pads but check for a power icon or the letters PW BT written on the logic board probably in the top case connector area. I think there are also two pads to reset the logic board written RESET over them.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

mayer, this might be the stuff you are looking for.

Block Image

Bu yanıt yardımcı oldu mu?

Puan 5

3 Yorum:

mayer, could you check and the see if this is the document for your computer

tarafından

Would you happen to have a copy of that document oldturkey03?

tarafından

email me. My address is in my user profile. Just click on my avatar....

tarafından

Yorum Ekle

Yanıtını ekle

mayer sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 13

Her zaman: 1,893