Ana içeriğe geç

The Canon PowerShot ELPH 180 point-and-shoot camera features a 20.0-megapixel sensor.

13 Soru Tümünü görüntüle

My canon camera lense is stuck

My canon camera lense is stuck and it is not working

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

If it is make a sound like " grgrgrgrgrgr", one of the gears are broken and if there is no sound, the motor or gear might be broken or something is stuck and not letting it move

Bu yanıt yardımcı oldu mu?

Puan 1

5 Yorum:

Yea mine did that and I broke two button board's or flex board and I bought a new on off ebay and my camera is not turning on so its the button bord or main board

tarafından

Interesting....

tarafından

Yea where can I buy parts from or test parts

tarafından

Try on iFixit or Ebay (i never used any of these)

tarafından

Yea I bought a flex borad off ebay and it didn't turn on the 180 and 160 so I don't know if it I fried the main board or if the flex board is broken but I bought a camera lens for the 180 cause that was the problem with it so I go to plug the lens in and it doesn't turn on I see that there are multiple scratches on the flex board so I bought a elph 160 and I scratced that one and I bought a new one off ebay and it didn't turn on so i don't know if it's the flex board or the main board where would I buy it off Ifixit ?

tarafından

Yorum Ekle

Devesh Semwal since this got converted from a comment to a question, we need to know your exact camera model. There are multiple reasons why a lens can be stuck. The mot common one is dirt between the barrels and a lens that has come of track. Start by following some of the suggestions made on here

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

Devesh Semwal sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 16

Son 30 gün: 48

Her zaman: 394