Eşyalarını Tamir Et Topluluk Mağaza

The Valve Index Base Station is a device used to track the position of virtual reality headsets and controllers. It uses infrared technology to accurately track the location of VR equipment in a room, allowing for a more immersive and responsive VR experience.

3 Soru Tümünü görüntüle

Seçenekler

What type of connector is used for the base station power cable?

The cable going between the wall wort and the base station had the connector snap in the wall wort. It's a small two prong adapter with a plastic flange that seems like it'd be relatively simple to re-solder if I could find a spare, but I have no idea how to find it. A name or a purchase link would be fantastic. To be clear I am referring to the plug on the other end of the cable from the barrel plug. I believe it is some kind of molex connector?


Female:

Block Image


Male (this is the part I need to replace):

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
2 Yorum

A pic would be super helpful

tarafından

Updated with photos. I've done some more digging and I think it might be a molex micro-connect

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

This is most likely a molex connector, as you have pointed out.

As far as I can tell, this should be part number 436450200 which you can view and also get a 3D model of on their official website.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 3

1 Yorum:

PS: Had the same issue on mine. I feel like this was a very bad design choice...

tarafından

Yorum Ekle

Yanıtını ekle

Walter Gray (Shenanigans) sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 9

Son 30 gün: 24

Her zaman: 545