Won't boot after enabling CSM

Question

Özel Üretim Masaüstü Bilgisayar

Hazır bir bilgisayar üreticisinden alınmak yerine, piyasada bulunan hazır parçalarla kendinizin veya bir sistem entegratörünün (SI) bir araya getirdiği masaüstü bilgisayardır.

20 Soru Tümünü görüntüle

Thomas Shafer @jfmer6

İtibar: 11

1

Gönderildi: 28 Oca 2023

Seçenekler

Won't boot after enabling CSM

So valorant required some security stuff that is done through bios, and it was all going well until I enabled csm and now my pc just beeps 5 times and reboots, I've already changed my cpu with a know working cpu, and I've reseated the ram, and now I don't know what to do. Gigabyte H310 s2p 2.0 (rev. 1.0) motherboard

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

4 Yorum

Hi @jfmer6,

What is the make and model number of the motherboard?

jayeff tarafından 28 Oca 2023

@jayeff it's a gigabyte h310 s2p 2.0 (rev. 1.0)

Thomas Shafer tarafından 29 Oca 2023

What graphic card are you using?

Combat x Computers tarafından 31 Oca 2023

Evga 1650 super

Thomas Shafer tarafından 6 Şub 2023

Yorum Ekle

2 Cevap

Seçilen Çözüm

jayeff @jayeff

İtibar: 522,4b

11

399

1,5b

Gönderildi: 30 Oca 2023

Seçenekler

@jfmer6

Can't see why a change in a BIOS setting would cause a 5 beep error code which is as you know a CPU problem.

Could just be coincidental that it happened at the same time.

Try a power refresh and check if that works in case the BIOS was corrupted. Disconnect the power to the PSU and then remove the coin cell battery from the motherboard. Press and hold the Power On button for a full 30 seconds and then release it. Reinsert the coin cell battery (+ve on top) reconnect the power to the PSU and try turning the PC on
Create a barebones PC and check i.e. motherboard with CPU, ram, GPU card (if no integrated graphics), PSU, monitor and keyboard only - disconnect everything else i.e. no HDD/SSD, no CD/DVD drive, no other cards, no external peripherals etc and then try turning it on and check if you can get into BIOS.
Do the paperclip test on the PSU to make sure that all the voltage supplies are OK

If still no good you may need the schematics (only one I could find online)

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

2 Yorum:

Unfortunately it did not work, will replacing the motherboard possibly fix it?

Thomas Shafer tarafından 31 Oca 2023

@jfmer6

If the PSU tests OK and since you have tried a different known working compatible CPU the only thing left is the motherboard because if the ram or GPU card were faulty you would get a different beep error code.

So it's either get a new board or the schematics and use them to try to find and fix the problem with the original board

jayeff tarafından 31 Oca 2023

Yorum Ekle

Hi @jfmer6,

What is the make and model number of the motherboard? — jayeff
Unfortunately it did not work, will replacing the motherboard possibly fix it? — Thomas Shafer
@jfmer6

If the PSU tests OK and since you have tried a different known working compatible CPU the only thing left is the motherboard because if the ram or GPU card were faulty you would get a different beep error code.

So it's either get a new board or the schematics and use them to try to find and fix the problem with the original board — jayeff