Ana içeriğe geç

Repair information and guides for the 2015 Retina MacBook Air. Model A1534

281 Soru Tümünü görüntüle

Speakers stopped working after battery replacement

I’ve had a swollen battery on my MacBook, luckily everything -apart from the battery was working- but after the battery was changed, the speakers don’t seem to be working, and when I press the sound buttons on the keyboard, I get the icon attached.

Block Image

What might be wrong and how can I find out what’s wrong?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Review this guide Retina MacBook 2015 Audio Jack Board Replacement either the cable leading to the board is not plugged in fully or may have become damaged or the board has failed.

Bu yanıt yardımcı oldu mu?

Puan 1

6 Yorum:

Does the Audio Jack Board have anything to do with the speakers?

tarafından

@genik - Yep! If you look at the board you will see a large square chip with CIRRIUS printed on it. This is the DAC chip which converts the digital signal to an analog to drive the speakers and the audio jack for your headphones.

Apple loves to maximize the internal space usage squeezing so much in a small space.

tarafından

@danj other than the three possible issues you suggest might there be anything else i should have a look at?

(btw you say "the cable leading to the board..." is that the "audio jack board ribbon cable" you are referring to?)

tarafından

@genik - just the cable.

tarafından

I have the impression that when changing the battery, the Audio Jack Board Ribbon Cable is totally untouched, simply because the battery replacement occurs in the underneath case... I could be wrong though :-)

tarafından

1 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

genik sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 15

Her zaman: 305