Ana içeriğe geç

Repair guides and service information for Omnicell Anesthesia Workstation (AWS) - an automated anesthesia medication dispensing system. There are several versions of the device: G3, G4, and XT Anesthesia Workstation.

1 Soru Tümünü görüntüle

Generic ttl outputs for the drawers and bins

Can I use a generic device to operate the drawer locks and bins, without going through the proprietary software? I purchased a surplused G4,

I am using the G4 as a hardware container!

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:

Steven Rose if it is anything like the Pyxis I have been working on, there is not really a good way. The addresses for the drawers etc. are all part of the software. Without the software, you do not get the desired drawer opening etc. unless you can code and write it yourself. You will need the right addresses for the drawers etc.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Steven Rose sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 8

Her zaman: 59