Eşyalarını Tamir Et Topluluk Mağaza

{A1989 / EMC3214}—Released in July 2018, the 13" MacBook Pro features quad-core i5 and i7 processors and Intel Iris Plus integrated graphics.

199 Soru Tümünü görüntüle

Seçenekler

When I open the lid, screen fades to white and goes flickery

When the lid is opened past 30 degrees the screen starts to fade to white and flickers untill you can barely see what is on the screen.

When you close the lid back to 30 degrees its like a switch and screen comes back to normal.

Otherwise works perfectly. Works to external screen ok.

I know older machines had probs with screen cable but they seem to result on screen going black.

Thanks in advance for any help

2018 macbook pro A1989 i7 2.7GHz 16Gb ram

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Yes, the older 2016/17 systems had a backlight cable issue what was called FlexGate!

In your case the issue is within the T-CON board and the LCD panel. There is a set of cables which connect between them so the board can paint the screens image. The reset signal is not working so the screen just additively adds the following image on top.

Sadly, you’ll need a new display assembly MacBook Pro 13" Retina (Mid 2018-Mid 2019) Display Assembly and here’s the guide MacBook Pro 13" Touch Bar 2018 Screen Replacement

MacBook Pro 13" Retina (Mid 2018-Mid 2019) Display Assembly Görseli

Ürün

MacBook Pro 13" Retina (Mid 2018-Mid 2019) Display Assembly

$479.99

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle
En Yararlı Yanıt

Seçenekler

Hi

I believe you have a issue called "flexgate" ;-{

Flexgate is where the screen cables start to break apart and perish

I was testing a A1989 MacBook Pro's screen a day or so ago and it had the exact same issue as what you are reporting

unfortunately the only long term fix is to ether have the display cables replaced which hardly any people do or have the display assembly replaced

Hopefully this helps

Any questions please ask

Thanks:-)

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

3 Yorum:

I thought the 2018 model had been fixed?

I thought I would probably need new screen, ouch!!

Oh well better dig deep and shell out.

Thanks for replies

tarafından

@alanhancock31

Yeah they ”fixed” it

In all fairness on the 2018 and above they did make the screen cables longer to try and avoid the issue but it unfortunately does still come about it’s just not as common

tarafından

@hellomacos @alanhancock31 - Here’s a good write up on FlexGate https://www.ifixit.com/News/16943/macboo... and the 2018 onward systems don’t encounter the issue as you can see better explained here https://www.ifixit.com/News/13979/apples.... That still doesn’t mean you still can’t encounter a backlight issue! A good bang along the black clutch cover or something wedged between the uppercase and the display bottom edge (chin-plate) which is a thin piece of glass which covers the cables going to the LCD panel can be damaged. The backlight goes out, black not white

tarafından

Yorum Ekle

Yanıtını ekle

alanhancock31 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 19

Her zaman: 174