İtibar: 13
1
Dear Supporting Team,
Kindly I have the trouble as follows:
Somehow a small screw stuck in the precision bit Driver at the magnetic part.
I try to pull out by using wax and other magnetic device but it is still not solved.
Kindly I need your help to know how I can withdraw the screw from the driver.
Thanks,
Mohamed El-Sayed
Bu iyi bir soru mu?
İtibar: 27,2b
77
33
52
I've had something happen like this. I was able to use a set of Precision Tweezers to pull it out.
Bu yanıt yardımcı oldu mu?
Hi Jacob,
I tried, but the problem is screw wedged in the driver
Thanks for your reply
@mh7 - See if a dental pick can get behind it, if not you’ll need to get a new handle.
İtibar: 587
9
9
13
Flick it, hold the driver with the bit part up and flick it down really fast. Centrifugal force should make the screw come away from the magnet.
Bu yanıt yardımcı oldu mu?
Use a pillow case to catch the screw!
Hi Dan,
The problem is screw wedged in the driver
Thanks for your reply
Son 24 Saat: 3
Son 7 gün: 11
Son 30 gün: 51
Her zaman: 557
