İtibar: 23
1
Hello, I have a Sony XBR65A8G, it was stuck in power cycle with 4 blinking red lights no display at all.
I reset the power by holding volume down + power button (on TV) and plugged it. it turned green then white and now back to red.
Now it is blinking red led 5 times.
No display at all during this exercise. (complete black screen)
Bu iyi bir soru mu?
İtibar: 783,2b
1,1b
893
2,3b
@nufailkhan 5 blink code is for a failed T-con board. The 4 blink code is common on this model and leads to a failed LCD driver board. Possible shorted component on that board and is ultimately consider a display panel error.
Bu yanıt yardımcı oldu mu?
I have to agree with you, after some time it is back to 4 red led.
I think this is a OLED panel issue. Going to scrap TV tomorrow. Thanks
Son 24 Saat: 1
Son 7 gün: 9
Son 30 gün: 80
Her zaman: 404
