Ana içeriğe geç

Learn about the skills that you might need to work on your device.

87 Soru Tümünü görüntüle

What is this connector, and how do I reconnect the cable?

I have been fixing some bent keys on my Roland rd88, and is now trying to reconnect this cable and connector:

Block Image

Block Image

It seems there are no latches to open.

I have this picture of another, similar connector type elsewhere on the keyboard pcb, but mounted flat:

Block Image

Any help?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
Seçilen Çözüm

Hi

You see these sorts of connections on Roland products quite regularly and they are a push fit type

They can be quite stubborn to connect but the best way of slotting them in is by lining them up and pushing them into the slot by holding both sides of the cable in firmly

Try and keep the cable as square as you can to the slot to prevent damaging the cable

Hopefully this helps

Any questions please ask

Thanks:-)

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

It's a slide-in type connector. Slide that back in and check of the component is working. This cable should be inserted vertically.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

DonMeta sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 21

Her zaman: 73