Eşyalarını Tamir Et Topluluk Mağaza

Released September 20, Apple's largest and most expensive 2019 smartphone features a 6.5" OLED display, a triple-lens camera system, and greatly improved battery life. Successor to the iPhone XS Max.

165 Soru Tümünü görüntüle

Seçenekler

My phone is turning off suddenly every 3/4 minutes

I phone 11 pro max problem

My phone is turning off suddenly every 3/4 minutes, then it turns on automatically. Important battery message shows after turning on the mobile. And the mobile is charging at 1%, and no battery health is showing. Again the battery health of the phone is showing for some time, everything looks normal. Then after running the phone again for a while the phone turns off and on again and the Battery important message is showing.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

4 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

@mehrajsalfi Yeah, here's the key line in your panic log:

Missing sensor(s): TG0B TG0V

According to the kernel panic Wiki:

TG0V and TG0B are a function of the battery.

So yeah, it's time for a new battery, my friend. This guide will show you how to go about replacing it.

iPhone XS Battery Replacement

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

1 Yorum:

Yup. This is a dead ringer for a battery problem to me. Right down to the weird battery data.

tarafından

Yorum Ekle

Seçenekler

@mehrajsalfi, If your phone is rebooting every three minutes then it's almost certainly due to a bad sensor, in this case it's most likely in the battery. Go read the information in @flannelist's excellent Kernel Panic Wiki article and use it to retrieve your panic logs, then come back here and paste the first page or so into an answer so we can confirm the source of your reboots.

iPhone Kernel Panics - iFixit

It sounds like you've got a bad connection going to your battery, as the battery health coming and going is not normal, and you shouldn't be getting the non-genuine battery warning if you still have the original battery or the battery was replaced by Apple, but we can confirm once we see the panic log.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

9 Yorum:

i cant paste the panic because it was too long to paste

tarafından

i cant paste the panic because it was too long to paste

tarafından

@mehrajsalfi Just the first part is usually sufficient; just paste whatever will fit into a comment or else you can paste it all into a separate answer.

tarafından

@dadibrokeit Thanks for your help , sir

tarafından

4 tane daha yorum göster

Yorum Ekle

Seçenekler

From my own experience, this is most likely a "Reset Counter" and "Panic Full" error. This is a hardware error that comes from shorted parts on the main iPhone. However, to be able to know exactly, you must have professional knowledge as well as a full range of tools to measure the pulse, otherwise you will need help from technicians.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

If the iPhone randomly restarts then this will capture the panic data that you can find as a panic log-on ( Setting/privacy and Security/Analytics &improvement/Analytics data ). This will help to find the faults that I have done by this in my iPhone.Post comment below with log data.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

{"bug_type":"210","timestamp":"2023-12-23 17:19:03.00 -0500""os_version":"iPhone

OS 17.1.2 (21B101)" "roots_installed":0,"incident_id"-"4A4C0EE9-0A25-4936-B228-

C3A757506CA5"}

{

"build" : "iPhone OS 17.1.2 (21B101)"

"product": "iPhone15,3"

"socid": "8120"

"socRevision": him",

"incident" : "4A4COEE9-0A25-4936-B228-C3A757506CA5",

"crashReporterKey": "8f1ffd7d702c9dec6390940d13cb0b5568ba2564"

"kernel": "Darwin Kernel Version 23.1.0: Tue Oct 10 02:21:50 PDT 2023;

root:xnu-10002.42.9-2V/RELEASE_ARM64_T8120"

"date": "2023-12-23 17:19:03.86 -0500"

"panicString": "panic(cpu 1 caller Oxfffffff0680eb1dc): SMC PANIC - ASSERTION

FAILED: target/d74V/target.cpp:266: 0, SMC BSC failure, spreadsheet ver(*10)

140\nS.sensor array 0 - 4 is 0x0, 0x140000, 0x0, 0x0, 0x0 \nF.sensor array 0 is 0x0|n|n

- Misc(2) OUTBOX1 not ready|nASSERTION FAILED: target d74target.cpp:266: 0, SMC BSC failure, spreadsheet ver(*10) 140\nS.sensor array

I’m having the same issue. Here’s my panic log. Can you tell me what this might be from?

tarafından

Yorum Ekle

Yanıtını ekle

Mehraj salfi sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 9

Son 7 gün: 39

Son 30 gün: 220

Her zaman: 2,196