Eşyalarını Tamir Et Topluluk Mağaza

Repair and disassembly information for the fifth-generation 12.9" iPad Pro featuring Apple's M1 SoC and an XDR mini-LED display.

27 Soru Tümünü görüntüle

Seçenekler

iPad Pro 5th Generation won't boot black screen, limited amperage draw

The iPad suffered impact that shattered screen. The amperage draw is continually .48, far below normal, regardless of how long it has been left on the charger. The charging port has been replaced and tested with no change. The screen has been replaced as well. The screen is black and there is no evidence it ever boots. Have tried soft reset (vol up, vol down, power). No change. New MFI cables and chargers have been tried. It will not mount for wipe/restore. Does not appear visible to external devices.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Did the device function before the screen repair?

I know the iPad pros need a lot of juice to charge. Have you tried any fast chargers?

Did you disconnect the battery while replacing the screen? If so, double check to make sure you have the battery screw securely in place. If you didn't disconnect the battery, you might've caused damaged to the board. Or if you pried between the battery connector you could've damaged that as well.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

No, the customer brought it to me functioning this way. It's currently on a fast charger, but hasn't changed in symptom.

tarafından

Yorum Ekle

Yanıtını ekle

jparks sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 44