Ana içeriğe geç

Samsung's flagship tablet, released in March 2017. Identified by model number SM-T820.

32 Soru Tümünü görüntüle

Does replacing the Charging Port Assembly require any SOLDERING

@dadibrokeit

Hi again Jerry :

Another question for you or anyone. Does replacing the above mentioned Charging Port Assembly ( Galaxy Tab S3 9.7 SM-T820) require any SOLDERING to replace?

Thanks in advance.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Hi Barbara,

Assuming you're talking about the complete charging port assembly - the same one that's advertised here on iFixit - then no, you do not need to do any soldering to replace it.

Block Image

After going through the Daughterboard Replacement guide, here are the tools you need.

  • Heat source: heating pad / iOpener / heat gun / blow dryer
  • Opening pick(s) / plastic card
  • Suction cup
  • Phillips #000 screwdriver
  • Spudger

Samsung Galaxy Tab S3 Daughterboard Replacement - iFixit Repair Guide

It appears that iFixit is out of stock on those daughterboards, but you shouldn't have any trouble finding a replacement on places like Amazon, eBay or AliExpress. Here's an example.

Charging Port Board For Samsung Galaxy Tab S3 9.7 SM-T820 / T823 / T825 / T827

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Barbara J Maggiani sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 26