İtibar: 205
4
So I was opening my camera to diagnose something but I accidentally pulled a little too hard on the shell when opening, and detached the wire from the backlight solder pad. LCD still works but no backlight. When I touch the wire to the pad the light will come in. Can this be re-soldered or is my backlight gone?
Bu iyi bir soru mu?
İtibar: 784b
1,1b
894
2,3b
@stechkid absolutely. This looks like a straight forward solder job. Now, if the cable is a bit to short, you may just solder "an extension to the end of the cable.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 3
Her zaman: 10
